UHZ series( Upper and Lower Limit Switch )Magnetic Level Gauge

Magnetic Level Gauge Range:500~5000mm Temperature:-40~420 C Pressure:0~32MPa Accuracy: 10mm

Magnetic Level Gauge

Range:500~5000mm

Temperature:-40~420 C

Pressure:0~32MPa

Accuracy: 10mm

Medium Density:0.5-2.0g/m3

Medium Density Difference:≥150kg/cm3

Ambient Vibration: Frequency≤25Hz,Amplitude≤0.5mm

Follow speed≤0.08m/s

Medium Viscosity:≤0.4Pa.S

Process Connection: Side-Mounted Flange:DN25,PN1.0 or 1.6,PN2.5

Flange Standard:HG20592~20635-97 other ordered by customer

Material of Wetted Parts: 1Cr18Ni9Ti, 304,316,316L

summarization

UHZ series Magnetic Level Gauge take float as measuring element. Magnetic steel drives column display, not requiring energy. UHZ is suitable for varies environment from Low to high temperature, from vacuum to high pressure, which is ideal level measuring instrument for Petrochemical Industry and etc.

We provide Side-Mounted and Top-Mounted according to installation site in the container.

We provide stainless steel, PP plastic, stainless steel lining teflon etc. according to medium. PP plastic and stainless steel lining teflon are ideal for acid and alkali corrosive medium.

 Structure Characteristic

 Basic Model

Float moves up and down with the elevation of level in the measuring tube, based on the principle of buoyancy. Permanent magnet steel in the float drives the red and white column roll over 180°by Magnetic Coupling effect. The column turns from white to red when the level rise, conversely, the column turns from red to white. Thus the level indication is realized.

Upper and Lower Limit Switch Output

The alarm switch on the set position of standpipe acts according to the magnetic float moving with the elevation of level. Thus it can realize ON-OFF control or alarm.

Electrical Remote Transmission

Transmitter is mounted on the magnetic level meter. The transmitter consists of sensor and transducer. It moves up and down the magnetic sub measurement measuring element followed by action role within the catheter by the magnetic coupling resistance signal change converts the standard 4 ~ 20mA current signal output, so that the digital display instrument or computer connection, Remote Display.

l  Main Technical Parameters

Installation			Side-Mounted	Top-Mounted
Installation Interval		Stainless Steel	500-5000mm	500-2500mmm
		PP	500-4000mm
Working Pressure			0.6,1.6,2.5,4.0MPa	0.6,1.6,2.5,MPa
Medium Density			≥0.6g/cm3	≥0.76g/cm3
Flange	Stainless Steel		20-40 (DN20,PN4.0) (GB/T9119-2000)	200-25 (DN200,PN2.5) (GB/T9119-2000)
	PP Plastic		20-10 (DN20,PN1.0) (GB/T9119-2000)	200-6 (DN200,PN0.6) (GB/T9119-2000)
Body Material			PP Plastic, Stainless Steel
Medium Temperature			-40~80°C 0~150°C 0~300°C (PP Plastic -10~60°C)
Ambient Temperature			-40~70°C
Indication Error			±10mm
Medium Viscosity			≤0.07Pa.S
Upper and Lower Limit Switch Output			Sensitivity Control:10mm Output Contact Capacity:AC220V0.5A Transducer:AC220V5A Contact Life:50000
Electrical Remote Transmission Continuous Display			Accuracy:±1.5% Output Load:4-20mA 0-500Ω Signal Output:DC4-20mA,Two-wire system Explosion-proof: iaⅡCT4 Intrinsically Safe

Note: 1. Side-Mounted: Stainless Steel: Measuring Range= Installation Space

PP: Indication Range= Installation Space L- 150mm

2. Installation Space (Measuring Range) Size: 500-5000mm (belonging to special orders design if longer than 5000mm)

UHZ series( Upper and Lower Limit Switch )Magnetic Level Gauge